Product Name: Electric scooter seat
Adapter model: NINEBOT ES1 ES2 ES3 ES4
Size: 214*270*113 mm
Adjustable height: 51-63 cm
Maximum load: 100 kg
Materils: Steel+Aluminum alloy
Cushion material: high elastic foam sponge / vacuum plastic
Weight: 2.5 kg
Notes: Please note there is not any wish to make holes for installation, the seat is specially desgined for the scooter, it can fit without any demage to the scooter.
Seat installation method:
1. Place the base: open the folding base seat tube, lock the folding box and quick release (you wish to have to first press and hold the folding lock column when locking, loosen the folding box upper cover and then release, then lock the quick release ), place the base at the rear of the scooter pedal.
2Locking screws: First place two plastic locking blocks between the bottom plate and the scooter body, insert the hexagonal screws into the mounting holes separately and pre-tighten them. Every screw is pre-tightened 8 times to fix the plastic locking block. . Then tighten the screws separately until they lock.
3. Install the shock seat tube and cushion kit: Open the quick release of the seat tube and loosen it, insert the shock seat tube and cushion kit and adjust to the appropriate height, and lock the quick release parts. Do not expose the safety cut-off line on the shock tube when adjusting the height.
4. Adjust the seat cushion: adjust the seat cushion to the use state and fasten it. If necessary, flip and retract it by turning the flipper on the cushion kit. Before riding, please check if the seat cushion is tightened. Whether it is loose, use a hex wrench to lock the hex nut on the flipper.
Note: The four studs in the manual 3.② are required for the installation of the XIAOMI MIJIA electric scooter seat, not included in the NINEBOT seat box.
NINEBOT official custom version NINEBOT electric scooter seat
For the consideration of long-distance riding comfort, the seat tailored for the NINEBOT series electric scooter came into being, and integrated with the scooter, continuing the simple design and more practical.After 300,000 times of load vibration test and give a boost to, more stable and reliable for your ride.
The seat cushion is made of high-quality elastic foam sponge, which is soft and elastic. It adopts leather surface coating process, which can effectively keep away from the aging reaction caused by direct contact between leather surface and foaming, and give a boost to the service life of the seat cushion.
Installation is simple, no drilling, does not hurt the scooter body;Tilt design, to keep away from the collapse of the scooter after the overlap; Folding one-button lock design, gently press then it is going to open.（If the scooter is equipped with an external battery, the seat can still be installed, but it is going to impact the folding, please know before buying.）
Package: 1*Saddle(Only Saddle,not include skateboard.)